& ALLIED MATERIAL AND BATTERIES
FOR INTERCONNECTIONS OF
UPCOMING IPPS
ITB-IPP-05
1.
National Transmission & Despatch Company (NTDC), intends
to purchase Telecommunication Equipment, Batteries and allied
material for interconnection of Upcoming IPPs through open tender
financed under NTDC’s own resources.
2.
NTDC invites sealed bids from the manufacturers/suppliers
from Pakistan or any country except those which are subject to
boycott in accordance with the laws of Islamic Republic of Pakistan
for supply of following Telecommunication Equipment and allied
material:
Sr.
No.
DESCRIPTION
QUANTITY
LOT-I
1.
Line Trap, 132kV, 0.315
mH (min. inductance), 1250 A.
50 Nos
2.
Coupling Capacitor 170
kV, min 6000pF with extended creepage distance complete
with steel supporting structure and accessories.
50 Nos.
3.
Line matching unit, minimum
1000 watts, complete with coupling filters, protection circuits,
(one set consists of two LMU. One with balancing transformer
and other without balancing transformer)
18 Nos.
4.
Line matching unit, minimum
1000 watts, with balancing transformer, coupling filters,
protection circuits, (phase to phase)
13 Nos.
5.
Digital PLC, 40
W Programmable with 2/4 wire E&M, subscriber
interface, all Digital interface cards having maximum operational
features etc. including MDF cables alongwith hinged frame
cubicle and Protection signaling equipment for atleast 4
commands.
36 Nos.
6.
Digital PLC, 80
W Programmable with 2/4 wire E&M, subscriber
interface, all Digital interface cards having maximum operational
features etc. including MDF cables alongwith hinged frame
cubicle and Protection signaling equipment for atleast 4
commands.
9 Nos.
7.
Digital Transit Filter
and other interface cards required for data in PLC equipment.
31 Nos.
8.
High frequency carrier
cable, Compatible with PLC
10 km
9.
All other ancillary equipment
such as cables, connectors, jumpers, mounting frames, fuses,
relays, nuts bolts etc. for a complete functional system
at all interconnecting grid stations
10 lots
10.
Trunk card compatible
with the exchanges installed at the opposite/existing ends.
(For opposite exchange installed type ECSF-D, type DCX-5
and type DCX-600). 4 nos. cards TLU-23 for DCX-5, 3 nos.
Cards CLG8 for ECSF-D and 3 nos. cards NFE 1784 for DCX-600)
10 Nos
11.
Private automatic exchange
with hinged frame cubicle, Software, hardware, Modem and
accessories etc. required for a fully functional system
equipped with a) 24 analogue trunks/24 analogue subscribers.
b) 2* 2Mb/s digital trunks/4 digital subscribers.
4 Nos.
12.
MDF complete (800 Pairs)
with quick connect modules and protection equipment for
external circuits complete with self-standing cabinet and
tools etc.
4 Nos.
13.
Spare parts for PLC equipment
(to be recommended by the bidder)
5 lots
14.
Test Kit complete with
accessories including MK-11 set etc.
3 Nos.
15.
Spare parts for Exchange
(to be recommended by the bidder)
1 lot
16.
Test kit/Programming
Kit for Telephone Exchange.
2 Nos.
17.
Training Charges for
items at Sr. No. 5, 6 & 11 above for three Telecommunication
Engineers for Six (6) days at manufacture’s works.
Lumpsum
LOT-II
1.
ADSS Fiber optic cable
14 km
2.
ADSS joint Boxes along
with accessories required for complete working system.
4 Nos.
3.
Low Density Optical Fiber
Terminal Equipment (1+1) and MUX alongwith protection signaling
equipment [one set consists of two Fiber Terminal Equipment
(1+1) for each station].
4 Sets
4.
Optical Approach cable
for installation on duct/Trenches/cable trays
3 km
5.
Optical Fiber Cable terminating
and Patch Panel along pigtails, connectors.
4 Nos.
6.
Spares for Optical Fiber
Terminal Equipment and MUX (to be recommended by the bidder)
1 lot
7.
Training Charges for
item at Sr. No. 3 above for one Telecommunication Engineer
for three (3) days at manufacture’s works.
Lumpsum
LOT-III
1.
Batteries 48 Volt DC,
100 AH, Complete with mounting racks, inter cell connectors
and all other accessories required for complete installation.
07 Nos.
2.
Batteries 48 Volt DC,
300 AH, Complete with mounting racks, inter cell connectors
and all other accessories required for complete installation.
05 Nos.
3.
AC, DC, earth cable and
other material required for complete installation of Batteries.
12 Set
4.
Telephone Set
15 Nos.
3.
Interested bidders may obtain further information
from the office of :
A complete set of bidding documents may be purchased on the
submission of a written application to the above address and upon
payment of a non refundable fee of Rs. 2,000/-.
5.
All bids must be accompanied by a Bid Security
of not less than (2%) of total Bid Price and must
be delivered to the above office on 13-01-2009
at 11:00 A.M. Bids will be opened in the presence of Bidder’s representatives
who choose to attend immediately after the time set for the bid
receipt.
6.
The bidders must quote for one or more complete lot.
Bid covering only a part of the lot will be rejected.
7.
NTDC reserves all rights to reject any/all the bids as per PPRA
Rule-33(1)
INVITATION FOR BIDS
PROCUREMENT OF STUBS FOR 220kV T/LINE
TOWERS
UNDER
NTDC,S OWN RESOURCES
NTDC-01-2008
1.
National Transmission
and Despatch Company (NTDC), a corporate entity constituted after
restructuring of WAPDA intends to purchase the stubs for 220kV
T/Line Towers mentioned in clause 2 below to meet with the urgent
construction requirements of certain 220kV T/Lines through open
tender financed under NTDCs own resources on the basis of National
Competitive Bidding.
2a.
NTDC (WAPDA) invites sealed
bids from the manufacturers/suppliers for supply of the following
material by local bidders only.
Sr.No.
Description
Unit
Qty.
1
2
3
4
1.
a)
Stubs and Cleats complete
in all respects required for 220kV EA Type Towers
Nos.
600
b)
Stubs and Cleats complete in all respects
required for 220kV EG Type Towers
Nos.
160
c)
Stubs and Cleats complete in all respects
required for 220kV JKD Type Towers
Nos.
120
2b.
The successful bidder will have to supply the goods/material within
a maximum period of 90 days for material offered on FCS basis, counted
from the date of issuance of Notification of Award (NOA).
3.
The Supplier/manufacturer should be pre-qualified from WAPDA/NTDC
to supply the tower material and must have all the requisite fabrication/
manufacturing, galvanizing, punching/marking, CNC machines, inspection
and testing facilities at their works. Non submission of evidences
may render the bid non responsive.
4.
Interested bidders may obtain further information from the office
of :
Chief Engineer (MP&M),
622-WAPDA House, Lahore
Telephone No. 92-42-9202597
Fax No. 92-42-9202173
5.
A complete set of bidding documents may be purchased on the submission
of a written application to the above address and upon payment of
a non refundable fee of Rs.2000/-
6.
All bids must be accompanied by a Bid Security of not less than
(2%) of total Bid Price and must be delivered to the above office
on 18-10-2008 at 11.00A.M.
7.
Bids will be opened in the presence of Bidder’s representatives
who choose to attend immediately after the time set for the bid
receipt
8.
The bidders must quote for the complete lot. Bid covering only
a part of the lot will be rejected.
9.
NTDC reserves all rights to reject any/all the bids as per PPRA
Rule-33(1)
INVITATION FOR BIDS
(EHV)
NTDC TENDER NOTICE
NAME
OF WORK:
Welding of Tower
Braces Nuts/Bolts up to about 6.0 Meters (20 Feet) height / ACD
and cleaning / painting of each welded Nut / Bolt (or any other
Galvanizing damaged during welding process) with Galvanox or ICI
Anti Rust Paint (High Eppox Zinc 10 Pats + Activator protect premier
1 part + Thinner 20 to 25%) from Tower No.01 to 815 newly constructed
500 KV Muzaffargarh-Gatti T/L.
ESTIMATED COST:
Rs.50,77,450/-
EARNEST MONEY:
02% of estimated cost.
COMPLETION PERIOD
120 Days.
COST OF TENDER:
Rs.1000/- (Non refundable)
ELEGIBILITY:
Contractors approved by the
Manager Civil (T&G) NTDC Lahore, and having experience such
of work of 500 KV T/Line in WAPDA/PEPCO.
TENDER OPENING
Tenders will be received on
20.09.2008 at 11:00 AM and opened on the same day at 11:30 AM.
For tender documents / BOQ detail contact with the office of the
undersigned up-to 19.09.2008. Tender from can be obtained from
this office on production of CDR / earnest money and Enlistment
/ Renewal for the year 2008-2009 and Engineering Council Certificate
and also experience as desired mentioned above. All rights reserved
to accept or reject with the undersigned. No tender will be issued
on opening date.
The Director, Public Relation, WAPDA
House, Lahore with the request to arrange publication of attached
tender notice in the leading Newspapers. It is also certified that
the provision of the work exists in the budget estimate for the
year 2008-2009.
2.
The Project Director (EHV) NTDC, Lahore w.r. telephonic
discussion with your good self on 05.08.2008. it is requested that
tender opening committee may please be constitute for opening subjected
work tender.
3.
The Assttt: Manager (C/A) EHV NTDC, Lahore.
INVITATION FOR BIDS
NTDC’s OWN RESOURCES
PROCUREMENT OF GRIDSTATION MATERIAL
Gallop
Tender
1.
NTDC
(WAPDA) intends to purchase equipment/material for extensions of
grid stations involving installation of additional 220 kV and 132
kV Line Bays for interconnection of upcoming IPPs described below
through open tender financed under NTDC/WAPDA’s own resources.
2.
NTDC (WAPDA)
invites sealed bids from the manufacturers/suppliers from Pakistan
or any country except those which are subject to boycott in accordance
with the laws of Islamic Republic of Pakistan for supply of equipment/material
of following ratings:
Sr.No
Description
Qty.
1.
145 kV,
40 KA, Current Transformers ratio 1600:800:400/1-1-1-1A, single
phase with extended creepage distance, marshalling boxes,
steel supporting structures, foundation bolts and terminal
connectors for 600mm² horizontal Aluminum Conductor
21 Nos.
2.
145 kV,
20 KA, Current Transformers ratio 1200:600:300/5-5-5-5A, single
phase with extended creepage distance, marshalling boxes,
steel supporting structures, foundation bolts and terminal
connectors for 600mm² horizontal Aluminum Conductor
51 Nos.
3.
Interested
bidders may obtain further information from the office of;
A complete
set of bidding documents may be purchased on the submission of a
written application to the above address and upon payment of a non-refundable
fee of Rs.1000/- w.e.f 10-09-2008.
5.
All bids must
be accompanied by a Bid Security of not less than (2%) of total
Bid Price and must be delivered to the above office on or before
11-10-2008 at 11:00 AM. Bids will be opened in
the presence of Bidder’s representatives who choose to attend immediately
after the time set for the bid receipt.
6.
The foreign
suppliers/bidders shall quote FOB, C&F and CIF Karachi prices
of the goods offered whereas the local suppliers/bidders shall quote
the EX-works as well as FCS (NTDC warehouse) prices. NTDC may place
order on either basis.
7.
The bidder
must quote for complete lot. Bid covering only a part of the lot
will be rejected.
TENDER
NO.NOR-07/2008
FOR PROCUREMENT OF TESTING AND MEASURING EQUIPMENT UNDER NTDC’s OWN
RESOURCES (TSG REQUIREMENT)
1.
National Transmission
and Despatch Company (NTDC)/PEPCO intends to purchase Testing
and Measuring Equipment described in clause 2 below through open
tender financed under NTDC/PEPCO’s own resources. The equipment
will be used by TSG Testing Gangs for the maintenance of the electrical
system.
2.
NTDC (PEPCO) invites sealed
bids from the manufacturers/suppliers from Pakistan or any country
except those which are subject to boycott in accordance with the
laws of Islamic Republic of Pakistan for supply of following testing
and measuring equipment:
Sr.No.
DESCRIPTION
QUANTITY
1.
Transformer Turn Ratio (TTR) test set (mains operated) as
per Specification P-154:81
One (01)No.
2.
Digital Low Resistance ohm-meter (DLRO) for
contact resistance measurement (as per Annex:1)
One (01)No
3.
Universal Relay Test Set (as per Annex:2)
One (01)No
4.
Secondary Injection Test Set (0-200A) as per annex:-3
Two (02) Nos.
5.
Clamp-on Meters
i) AC/DC Clamp on meters (0-0.2, 2.0,20 & 200A as per
Annex:-4
One (01)No
ii) AC/DC Clamp on meters as per Annex:-5
One (01)No
6.
Digital Multi Meters (0-750 ACV, 0-1000 DCV,0-10A) (0-10M?)
as per annexure-6
Two(02) Nos.
3.
Interested Bidders may obtain further information
from the office of,
A complete set of bidding documents
may be purchased on the submission of a written application to
the above address and upon payment of a non-refundable fee of
Rs. 1500/- w.e.f.06/09/2008.
5.
All bids must be accompanied
by a Bid Security of not less that (2%) of total Bid Price and
must delivered to the above office on or before 24/10/2008 at
11:AM.
Bids will be opened in the presence of Bidder’s representatives
who choose to attend immediately after the time set for the bid
receipt.
6.
The foreign Suppliers/Bidders shall quote FOB, C&F
and CIF Karachi prices of the goods offered whereas the local supplier/bidders
shall quote the ex-works as well as FCS (NTDC Warehouses) prices,
NTDC may place order on either basis.
7.
The bidders must quote for one or more complete lots.
Bid covering only a part of the lot will be reject. Evaluation and
comparison of the bids will be carried out on lot basis.
8.
NTDC reserves the right to accept/reject any tender
without assigning any reason whatsoever.
Tender
No. GSO-01-2008
For Procurement Of 220 kV & 500 kV Towers, Their Extensions &
Components Of 500 kV Towers, Type DHJ, SHJ1, And AHJ, To Meet With Eventualities
Under NTDC's Own Resources
1.
National Transmission
and Despatch Company (NTDC), a corporate entity constituted after
restructuring of WAPDA intends to purchase 220kV, 500kV T/Line complete
Towers & their extensions and components of 500kV Towers mentioned
in clause 2 below for different GSO formations to meet with eventualities
through open tender financed under NTDC’s own resources on the basis
of National competitive bidding.
2a.
NTDC (WAPDA)
invites sealed bids from the manufacturers/suppliers for supply
of the following material by local bidders only.
Sr.
#
Description
Unit
Qty
1
2
3
4
1.
LOT-I
(220KV STEEL TOWERS)
a)
i
Tower
type EA (complete with stubs including all accessories)
Nos.
8
ii
2m Single
Leg Extension
Nos.
4
iii
4m Single
Leg Extension
Nos.
8
iv
6m Single
Leg Extension
Nos.
4
v
8m Single
Leg Extension
Nos.
4
vi
Tower
Peak
Nos.
1
vii
Cross
Arm (Top, Middle & Bottom)
Nos.
6
b)
i
Tower
type ED (complete with stubs including all accessories)
Nos.
8
ii
2m Single
Leg Extension
Nos.
4
iii
4m Single
Leg Extension
Nos.
8
iv
6m Single
Leg Extension
Nos.
4
v
8m Single
Leg Extension
Nos.
8
vi
Tower
Peak
Nos.
1
vii
Cross
Arm (Top, Middle & Bottom)
Nos.
6
c)
i
Tower
type EG (complete with stubs including all accessories)
Nos.
8
ii
2m Single
Leg Extension
Nos.
4
iii
4m Single
Leg Extension
Nos.
8
iv
6m Single
Leg Extension
Nos.
4
v
8m Single
Leg Extension
Nos.
4
vi
Tower
Peak
Nos.
1
vii
Cross
Arm (Top, Middle & Bottom)
Nos.
6
d)
i
Tower
type JKD(complete with stubs including all accessories)
Nos.
8
ii
6m Body
Extension
Nos.
8
iii
1.5m
Single Leg Extension
Nos.
8
iv
3m Single
Leg Extension
Nos.
2
v
4.5m
Single Leg Extension
Nos.
2
vi
6m Single
Leg Extension
Nos.
10
vii
Tower
Peak
Nos.
1
Viii
Cross
Arm (Top, Middle & Bottom)
Nos.
6
2.
LOT-II
(500KV STEEL TOWERS)
a)
i
Tower
type SGM(complete with stubs including all accessories)
Nos.
14
ii
4.5m
Body Extension
Nos.
5
iii
9.0m
Body Extension
Nos.
5
iv
1.5m
Single Leg Extension
Nos.
4
v
3.0m
Single Leg Extension
Nos.
4
vi
4.5m
Single Leg Extension
Nos.
4
vii
6.0m
Single Leg Extension
Nos.
4
b)
i
Tower
type AGM(complete with stubs including all accessories)
Nos.
10
ii
4.6m
Body Extension
Nos.
2
iii
9.1m
Body Extension
Nos.
2
iv
4.6m
Single Leg Extension
Nos.
4
v
6.1m
Single Leg Extension
Nos.
4
c)
i
Tower
type DGM(complete with stubs including all accessories)
Nos.
10
ii
4.6m
Body Extension
Nos.
2
iii
9.1m
Body Extension
Nos.
2
iv
4.6m
Single Leg Extension
Nos.
4
v
6.1m
Single Leg Extension
Nos.
4
d)
i
Tower
type TGM(complete with stubs including all accessories)
Nos.
2
e)
Components
of 500kV Towers
i
Wt. Components
of 500kV Towers type DHJ-H
Kg.
5309
ii
Wt. Components
of 500kV Towers type DHJ-M
Kg.
120
iii
Wt. Components
of 500kV Towers type AHJ-H
Kg.
2871
iv
Wt. Components
of 500kV Towers type AHJ-M
Kg.
2.7
v
Wt.Components
of 500kV Towers type SHJ-1-H
Kg.
7324
vi
Wt.Components
of 500kV Towers type SHJ-1-M
Kg.
3347
vii
Wt.Components
of 500kV Towers type SHJ-2-H
Kg.
2864
Viii
Wt.Components
of 500kV Towers type SHJ-2-M
Kg.
1898
The
detail of components of 500kV Towers is attached in the bidding
document.
2b.
The successful
bidder will have to supply the goods/material within a maximum period
of 180 days for material offered on FCS basis, counted from the
date of issuance of Notification of Award (NOA).
3
The Supplier/manufacturer
must have, at least 5 years experience of manufacturing/supply of
identical goods/material with same or higher rating and capacity
and 3 years satisfactory operational experience of such goods/material.
The bidders, who are not manufacturers themselves, shall furnish
an authorization from the concerned manufacturer to submit a bid
for supply of their goods to Pakistan against this tender. Moreover,
the manufacturer should have manufactured/delivered reasonable quantities
of such goods/material to the customers. Non submission of evidences
may render the bid non responsive.
4
Interested
bidders may obtain further information from the office of :
A complete
set of bidding documents may be purchased on the submission of a
written application to the above address and upon payment of a non
refundable fee of Rs.5000/- w.e.f 18-08-2008.
6
All bids must
be accompanied by a Bid Security of not less than
(2%) of total Bid Price. The Bids will be received in the above
office on 17-09-2008 upto 11:00 Hours and will
be opened at 11:30 Hours in the presence of Bidder’s representatives.
7
The bidders
must quote for one or more complete lots. Bid covering only a part
of the lot will be rejected.
8
NTDC reserves
the right to accept/ reject any tender without assigning any reason
whatsoever.
INVITATION FOR BIDS
Loan No.
2396-PAK
Power Transmission Enhancement Investment Program
PROCUREMENT OF 220 kV & 132 kV TRANSMISSION LINE MATERIAL
Bidding Document No. ADB-40R-2008
This
Invitation for Bids follows the General Procurement Notice for this
project that appeared in the "ADB Business Opportunities", issued
on 27th October 2006.
The
Islamic Republic of Pakistan has requested a loan from the Asian Development
Bank (ADB) towards the cost of Power Transmission Enhancement Investment
Program, and it intends to apply part of the proceeds of this loan
to payments under the contract for Procurement of 220 kV Transmission
Line Material.
The
National Transmission and Dispatch Company now invites sealed Bids
from eligible Bidders for Procurement of 220 kV & 132 kV Transmission
Line Material in six (6) lots given below. The bidder may quote for
any number of lots.
Sr.
No.
Lot
No.
Description
Quantity
1
Lot-I
220kV Steel
Towers.
290
Nos.
2
Lot-II
ACSR Rail
Conductor
1450
Km
3
Lot-III
220kV Poles
132kV Poles
120
Nos.
77 Nos.
4
Lot-IV
OPGW 24
Fiber along with Accessories
175
Km
5
Lot-V
OPGW 12
Fiber along with Accessories
32
Km
6
Lot-VI
Fiber
Optic Terminal Equipment
4
Sets
International
competitive bidding will be conducted in accordance with ADB's Single
stage, one envelope procedure and is open to all bidders from eligible
source countries.
Interested
eligible Bidders may obtain further information from National Transmission
and Dispatch Company and inspect the Bidding Document at the address
given below, from 8:00 am to 2:30 pm.
The
Bidding Document, in the English language, may be purchased by interested
Bidders w.e.f 8th July 2008, on the submission of
a written application to the address below and upon payment of a nonrefundable
fee Rs. 10,000/- or US $ 150/- The
method of payment will be by Bank Draft from any Scheduled Bank* of
Pakistan in favor of CE (MP&M) NTDC, 622- WAPDA House, Lahore. The
document may be collected in person or may be sent by express airmail
for an additional fee of Rs. 6,800/- for domestic
delivery or US$100/- for overseas delivery, the documents
may be sent by courier services. No liability will be accepted for
loss or late delivery.
Bids must be delivered to the above address at or before 11:00
am, on 26th August 2008. All Bids must be accompanied by a Bid
Security as per following:
LOT-I (220kV
Steel Towers)
= US$ 77,000
or 5.2 Million Pak Rupees
LOT-II
(ACSR Conductor)
= US$ 160,000
or 10.88 Million Pak Rupees
LOT-III
(220kV & 132kV Poles)
= US$ 32,000
or 2.17 Million Pak Rupees
LOT-IV
(OPGW 24 Fiber along with Accessories)
= US$ 4,657
or 0.31 Million Pak Rupees
LOT-V (OPGW
12 Fiber along with Accessories)
= US$ 1,241
or 0.084 Million Pak Rupees
LOT -VI
(Fiber Optic Terminal Equipment)
= US$ 10,000
or 0.68 Million Pak Rupees
Late bids shall be rejected. Bids will be opened in the presence of
the Bidders' representatives who choose to attend at the address .below
at [11.30 am on 26th August 2008].
The National Transmission and Dispatch Company will not be responsible
for any costs or expenses incurred by Bidders in connection with the
preparation or delivery of Bids.
In
the comparison of Bids, ADB's Domestic Preference Scheme will be applied
in accordance with the provisions stipulated in the Instructions to,
Bidders.
NTDC
intends to purchase 1.5 Ton Capacity Window type Air Conditioners
through open tender financed under NTDC’s local fund without involving
any foreign exchange element on the Free Delivery to Consignee’s Store
NTDC Warehouse Kotlakhpat within 60 days. –
Sr.#
Description
of Material
Quantity
1.
1.5
Ton Capacity Window type Air Conditioner
230
Volts ±10%, 50 Hz as per specification attached.
194
Nos.
Interested
Prequalified/Registered firms with NTDC/WAPDA/DISCOs may obtain information
in this regard from the office of:
A
complete set of Bidding Documents may be purchased on the submission
of a written application to the above address and upon payment of
a non-refundable fee of Rs200 w.e.f 05-03-2008
All
bids must accompany Bid Security in the shape of Bid Guarantee or
CDR favouring C.E (MP&M) NTDC of not less than 2% of total Bid
Price and must be delivered to the above office on or before 20/03/2008
at 11:00 Hours. Bids will be opened on the same day at 11:30 Hours
in the presence of Bidder’s representatives who choose to attend.
Sales
Tax registration is mandatory for issuance of tender documents.
